Mahindra G90 Road Master Motor Grader

4500000.00 - 5000000.00 INR

Get a Price/Quote

Ask A Question Send Inquiry

Price And Quantity

Specification :

Operating Specification

Gross vehicle weight	8350 +/- 167 kg
FAW	2800 +/- 56 kg
RAW	5500 +/- 110 kg
Speed @ gear (kmph)	Forward	Reverse
1^st	4.5 to 6	5.5 to 7.5
2^nd	7.5 to 9.0	9.0 to 10.5
3^rd	16.5 to 18.5
4^th	33.0 to 36.5
Turning radius outside tyre R1	10 m
Steering angle inner wheel	45 degrees
Steering angle outer wheel	32 degrees

Moldboard

Cutting Edge (Blade)

Standard Length of Cutting Edge	WB	2600 mm {3 piece cutting edge} {1100 + 1100 + 400}
Standard length of cutting edge with side extension	WB	3000 +/- 15 mm {4 piece cutting edge} {1100 + 1100 + 400+ 400}
Width of Cutting Edge	152 +/- 2 mm
Thickness of Cutting Edge	16 +/- 0.5 mm
End Bit
Width	C	200 +/- 1 mm
Thickness	16 +/- 0.5 mm
Blade Pull force (Kgs )	27
Blade Down force (Kgs)	27

Dimensions (IN MM)

Distance between mid & rear axle	L9	1850 mm
Distance between front & middle axle	A	4300 mm
Wheel Base	L3	5225 mm
Distance- Front axle to Moldboard Blade base	L12	1691 mm
Transport length	L1	8578 mm
Ground Clearance below front axle beam	H18	528 mm
Minimum Ground Clearance	H4	467 mm
Max vehicle height	H1	3290 mm
Track width- Front	W3F	1674 mm
Track Width Rear	W3R	1654 mm
Width- outside front tires	W1F	2021 mm
Width- outside rear tires	W1R	2001 mm
Width Transport (Without blade extensions)	WW7	2327 mm
Width Transport (With blade extensions)	WW7'	2080 mm

Blade Range

Circle rotation angle	AB	50 +/-1.5 deg from transverse of vehicle
Circle drive	Hydraulic cylinders with no end mechanical stoppers
Blade side shift (LH/ RH)		513 +/-2.6 mm
Blade tilt angle/ Bank cut angle (LH/RH) at ground level measured on blade		25.6' / 20'] +/- 2
Blade pitch angle at ground line	A11	Forward 40' +/- 2 , Backward 15' +/- 2
Blade lift at normal blade pitch angle		395 +/- 25*
Max blade cut depth below ground at nominal blade angle		300 +/- 25*
Attachment oscillation angle		Upward 10 +/-2 deg, Downward 15 +/-2 deg

Transmission

Front Axle

Type	None Driven, Steerable Central Pivoted
Loading Capacity(TON)	8
Middle Axle
Type	Driven, Non Steerable, Rigid
Reduction ratio, Differential	2.75
Reduction Wheel end	6.932
Total Reduction Ratio	19.04

Rear Axle

Type	Driven, Non Steerable, Central Pivoted, +/-5 Oscillation angle
Reduction ratio, Differential	2.75
Reduction Wheel end	6.932
Total Reduction Ratio	19.04

Tyres and Wheels

Tyre Pressure

Front / Middle / Rear

44 +/-2psi

Brakes

Service Brake type	Foot operated hydraulically actuated oil immersed disc in middle axle
Parking brake type	Hand operated, mechanically, actuated oil immersed disc in middle axle
Steering
Type	Power Steering
steering Valve	Load sensing with priority valve 200 cc
Other feature	Emergency steering in case of pump failure
Electrical
System Voltage	12 V
Battery Rating	12 V, 100 AH
Alternator type	12 V, 90Amp

Hydraulics

System	Open Centre
Pump Type	Fixed Displacement Tandem Gear Pump 26. cc + 26 cc
Max Pump Flow rate	54 litres@ 2200 rpm
Max Working pressure	200 +/- 15 bar
Refill qty	50 litres
System Capacity	60 litres
Other Feature	Load Holding with pressure refill valves for lift and sensing cylinder
Service Capacities
Hydraulic tank	50 litres @ 2000 hrs
Fuel tank	85 litres
Engine coolant	17 litres @ 1000 hrs
Engine oil	13.5 litres @ 500 hrs
Transmission	16 litres @ 1000 hrs
Middle axle or Rear axle (Differential)	14.5 Litres @1500 hrs for each axle
Middle Axle or Rear Axle (Final Drive)	1.5 litres (On each wheel end) @ 1500 hrs